How To Take Off Governor On Golf Cart?

Removing the governor on a golf cart can be a bit tricky, but with the right tools and know-how, it can be done successfully. Before you begin, make sure you have the necessary equipment and that you are comfortable working on your golf cart. Keep in mind that removing the governor may void your warranty, so proceed with caution.

Step 1: Locate the Governor

The governor on a golf cart is typically located under the engine cover or behind the driver’s seat. It is a small device that regulates the speed of the vehicle to prevent it from going too fast. To remove the governor, you will need to access this part of the cart.

Step 2: Disconnect the Battery

Before you start working on the governor, it is essential to disconnect the battery to prevent any electrical mishaps. Locate the battery on your golf cart and safely disconnect it before proceeding with the removal process.

Step 3: Remove the Engine Cover

If the governor is located under the engine cover, you will need to remove this first. Using a screwdriver or a drill, carefully take off the cover to reveal the inner components of the engine, including the governor.

Step 4: Identify the Governor Mechanism

Once the engine cover is removed, locate the governor mechanism. This is typically a small lever or rod that is connected to the throttle cable. You may need to consult your golf cart manual for specific instructions on where to find this component.

Step 5: Disconnect the Throttle Cable

To remove the governor, you will need to disconnect the throttle cable from the governor mechanism. Use a pair of pliers to carefully detach the cable from the lever or rod, ensuring not to damage any surrounding components in the process.

Step 6: Remove the Governor Mechanism

Once the throttle cable is disconnected, you can proceed to remove the governor mechanism itself. Depending on the type of governor your golf cart has, this may involve unscrewing the device or simply pulling it out of place.

Step 7: Test the Golf Cart

After removing the governor, it is essential to test your golf cart to ensure that it is running smoothly without any issues. Take it for a test drive in a safe environment to see if the removal process was successful.

Step 8: Reassemble the Engine Cover

If you had to remove the engine cover to access the governor, make sure to reassemble it properly once the removal process is complete. Secure all screws and bolts to ensure that the cover is tight and secure.

Step 9: Reconnect the Battery

Once everything is back in place, reconnect the battery to power up your golf cart. Double-check all connections and ensure that everything is functioning as it should before taking your cart out for a ride.

Step 10: Check for Any Issues

After removing the governor, keep an eye out for any potential issues that may arise with your golf cart. Monitor the performance of the vehicle and listen for any strange noises that could indicate a problem.

Step 11: Enjoy the Increased Speed

By removing the governor on your golf cart, you may notice a significant increase in speed and performance. Enjoy the newfound power of your cart, but always remember to drive safely and responsibly.

Step 12: Seek Professional Help If Needed

If you are unsure about removing the governor on your golf cart or encounter any difficulties during the process, do not hesitate to seek professional help. A certified technician can assist you in safely removing the governor and ensuring that your golf cart remains in top condition.